Mã | AIR-AP3802E-S-K9 |
Antennas | External Antennas |
Permit Antenna Gains | Up to 6 dBi |
Interfaces | - 2 Ethernet ports |
- 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) | |
- CAT 5e cabling | |
- Higher-quality 10GBASE-T (CAT 6/6a) cabling | |
- 100/1000BASE-T autosensing (RJ-45 - AUX port) | |
- Management console port (RJ-45) | |
Features | - 4x4 MU-MIMO with three spatial streams |
- MRC | |
- 802.11ac beamforming | |
- 20-, 40-, 80, 160-MHz channels | |
- PHY data rates up to 5.2 Gbps | |
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
- 802.11 DFS | |
- CSD support | |
Regulatory Domain | S (S regulatory domain): |
- 2.412 to 2.472 GHz; 13 channels | |
- 5.150 to 5.320 GHz; 8 channels | |
- 5.745 to 5.825 GHz; 5 channels | |
System | - 1024 MB DRAM |
- 256 MB flash | |
Dimensions (W x L x H) | 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm) |
Net Weight | 4.6 lb (2.09 kg) |
WiFi Cisco AIR-AP3802E-S-K9 | |
Software and supported wireless LAN controllers | Cisco Unified Wireless Network Software Release 8.2.MR1 or later |
Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller | |
Cisco IOS®XE Software Release 16.3 – Target Q3 CY2016 | |
Cisco Catalyst 3850 Series and 3650 Series Switches | |
802.11n version 2.0 (and related) capabilities | 4x4 MIMO with three spatial streams |
Maximal ratio combining (MRC) | |
802.11n and 802.11a/g beamforming | |
20- and 40-MHz channels | |
PHY data rates up to 450 Mbps (40 MHz with 5 GHz). | |
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
802.11 dynamic frequency selection (DFS) | |
Cyclic shift diversity (CSD) support | |
802.11ac Wave 1 capabilities | 4x4 MIMO with three spatial streams |
MRC | |
802.11ac beamforming | |
20-, 40-, and 80-MHz channels | |
PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) | |
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
802.11 DFS | |
CSD support | |
802.11ac Wave 2 capabilities | 4x4 MU-MIMO with three spatial streams |
MRC | |
802.11ac beamforming | |
20-, 40-, 80, 160-MHz channels | |
PHY data rates up to 5.2 Gbps | |
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
802.11 DFS | |
CSD support | |
Integrated antenna | Flexible radio (either 2.4 GHz or 5 GHz) |
2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth | |
5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90° | |
Dedicated 5-GHz radio | |
5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth | |
External antenna (sold separately) | 3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N=antenna | |
Cisco offers the industry's broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios | |
Smart Antenna Connector | Available on the 3802e Series and 3802p Series access points only |
Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point | |
Required when running the flexible radio as either a: | |
◦ Second 5-GHz serving radio | |
◦ Wireless Security Monitoring radio | |
Interfaces | ◦ 2 Ethernet ports |
◦ 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz | |
◦ CAT 5e cabling | |
◦ Higher-quality 10GBASE-T (CAT 6/6a) cabling | |
◦ 100/1000BASE-T autosensing (RJ-45 - AUX port) | |
◦ Management console port (RJ-45) | |
Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
Dimensions (W x L x H) | Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm), 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm) |
Weight | 4.6 lb (2.09 kg) |
Input power requirements | 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE®) |
802.3at power injector (AIR-PWRINJ6=) | |
50W power supply (AIR-PWR-50=) | |
Power draw | 30W at the PSE with all features enabled except for the USB 2.0 port |
34W at the PSE with the USB 2.0 port enabled | |
Environmental | Cisco Aironet 3800i |
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
Operating temperature: 32° to 104°F (0° to 40°C) | |
Operating humidity: 10% to 90% percent (noncondensing) | |
Operating altitude test: 40˚C, 9843 ft. | |
Cisco Aironet 3800e | |
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
Operating temperature: -4° to 122°F (-20° to 50°C) | |
Operating humidity: 10% to 90% (noncondensing) | |
Operating altitude test: 40˚C, 9843 ft. | |
Cisco Aironet 3800p | |
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
Operating temperature: -4° to 122°F (-20° to 50°C) | |
Operating humidity: 10% to 90% (noncondensing) | |
Operating altitude test: 40˚C, 9843 ft. | |
System memory | 1024 MB DRAM |
256 MB flash |
Models | AIR-AP3802E-S-K9 | AIR-AP3802P-H-K9 |
Permit Antenna Gains | Up to 6 dBi | Up to 13 dBi |
Interfaces | - 2 Ethernet ports | - 2 Ethernet ports |
- 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) | - 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) | |
- CAT 5e cabling | - CAT 5e cabling | |
- Higher-quality 10GBASE-T (CAT 6/6a) cabling | - Higher-quality 10GBASE-T (CAT 6/6a) cabling | |
- 100/1000BASE-T autosensing (RJ-45 - AUX port) | - 100/1000BASE-T autosensing (RJ-45 - AUX port) | |
- Management console port (RJ-45) | - Management console port (RJ-45) | |
Regulatory Domain | S (S regulatory domain): | H (H regulatory domain): |
- 2.412 to 2.472 GHz; 13 channels | - 2.412 to 2.472 GHz; 13 channels | |
- 5.150 to 5.320 GHz; 8 channels | - 5.150 to 5.320 GHz; 8 channels | |
- 5.745 to 5.825 GHz; 5 channels | - 5.745 to 5.825 GHz; 5 channels |
3802E Series Access Points | ||
AIR-AP3802E-A-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig A Domain | $1,895 |
AIR-AP3802E-B-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig B Domain | $1,895 |
AIR-AP3802E-C-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig C Domain | $1,895 |
AIR-AP3802E-D-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig D Domain | $1,895 |
AIR-AP3802E-E-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig -E Domain | $1,895 |
AIR-AP3802E-F-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig F Domain | $1,895 |
AIR-AP3802E-G-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig G Domain | $1,895 |
AIR-AP3802E-H-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig -H Domain | $1,895 |
AIR-AP3802E-I-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig I Domain | $1,895 |
AIR-AP3802E-K-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig -K Domain | $1,895 |
AIR-AP3802E-N-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig N Domain | $1,895 |
AIR-AP3802E-Q-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig Q Domain | $1,895 |
AIR-AP3802E-S-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig S Domain | $1,895 |
AIR-AP3802E-T-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig -T Domain | $1,895 |
AIR-AP3802E-Z-K9 | 802.11ac W2 AP w/CA; 4x4:3; Mod; Ext Ant; mGig Z Domain | $1,895 |
AIR-ANT2524DB-R | Cisco AIR-ANT2524DB-R 2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., Black, RP-TNC |
AIR-ANT2524DG-R/= | Cisco AIR-ANT2524DG-R 2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., Gray, RP-TNC |
AIR-ANT2524DW-R/= | Cisco AIR-ANT2524DW-R 2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., White, RP-TNC |
AIR-ANT2566P4W-R= | Cisco AIR-ANT2566P4W-R 2.4 GHz 6 dBi/5 GHz 6 dBi Directional Ant., 4-port, RP-TNC |
AIR-ANT2524V4C-R= | Cisco AIR-ANT2524V4C-R 2.4GHz 2dBi/5GHz 4dBi Ceiling Mount Omni Ant., 4-port,RP-TNC |
AIR-ANT2544V4M-R= | Cisco AIR-ANT2544V4M-R 2.4GHz 4dBi/5GHz 4dBi Multi Mount Omni Ant., 4-port,RP-TNC |
Cisco AIR-AP1832I-S-K9 | 802.11ac Wave 2 AP, 3x3:2, Internal Antenna, S Regulatory Domain |
Cisco AIR-AP1852I-S-K9 | 802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, S Regulatory Domain |
Cisco AIR-AP1852E-S-K9 | 802.11ac Wave 2 Access Point, 4x4:4, External-Ant, S Regulatory Domain |
Cisco AIR-AP2802E-S-K9 | 802.11ac Wave 2 AP w/CleanAir, 4x4:3, External Antenna, 2xGbE, S Regulatory Domain |
Cisco AIR-AP2802I-S-K9 | 802.11ac Wave 2 AP w/CleanAir, 4x4:3, Internal Antenna, 2xGbE, S Regulatory Domain |
Cisco AIR-AP3802E-S-K9 | 802.11ac Wave 2 AP w/CleanAir, 4x4:3, Mod, External Antenna, mGig, S Regulatory Domain |
Cisco AIR-AP3802I-S-K9 | 802.11ac Wave 2 AP w/CleanAir, 4x4:3, Mod, Internal Antenna, mGig, S Regulatory Domain |
Cisco AIR-CT2504-5-K9 | Cisco 2500 Controller AIR-CT2504-5-K9 2504 Wireless Controller with 5 AP Licenses |
Cisco AIR-CT2504-15-K9 | Cisco 2500 Wireless Controller - 2504 Wireless Controller with 15 AP Licenses for Cisco 250 |
Cisco AIR-CT2504-25-K9 | Cisco 2500 Controller AIR-CT2504-25-K9 2504 Wireless Controller with 25 AP Licenses |
Cisco AIR-CT3504-K9 | Cisco 3504 Wireless Controller |
Cisco AIR-CT5520-K9 | Cisco 5500 AIR-CT5520-K9 Cisco 5520 Series Wireless Controller |
Cisco AIR-CT8540-K9 | Cisco 8540 AIR-CT8540-K9 - Cisco 8540 Wireless Controller |
Cisco AIR-AP4800-S-K9 | Cisco Aironet 4800 Series Access Points 802.11ac W2 Analytics AP w/CA; 4×3:3; Location; mGig -S Domain |