Product Name | Aironet 1832I - Wireless access point - 802.11a/b/g/n/ac |
Manufacturer Part Number | AIR-AP1832I-S-K9 |
Product Line | Aironet |
Product Series | 1830 |
Product Model | AP1832I |
Product Type | Access Point Cisco |
Technical Information | |
Wireless LAN Standard | IEEE 802.11ac |
Frequency Band | 5 GHz |
2.40 GHz | |
Wireless Transmission Speed | 867 Mbit/s |
MIMO Technology | Yes |
Beamforming Technology | Yes |
Interfaces/Ports | |
Ethernet Technology | Ethernet |
Fast Ethernet | |
Gigabit Ethernet | |
Number of Network (RJ-45) Ports | 1 |
PoE (RJ-45) Port | Yes |
PoE PD Port | Yes |
VGA | No |
HDMI | No |
USB | Yes |
Powerline | No |
Management Port | Yes |
Physical Characteristics | |
Height | 8.3" |
Width | 8.3" |
Depth | 2" |
Warranty | |
Limited Warranty | Lifetime |
Other Information | |
Product Family | Aironet 1830 |
Stock Details | |
Manufacturer | Cisco Systems |
Manuf Part# | AIR-AP1832I-S-K9 |
Giá AIR-AP1832I-S-K9 | $ |
AIR-AP1832I-S-K9 | |
Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: |
8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points | |
Deployment modes | Centralized, standalone, sniffer, Cisco FlexConnect™, monitor, OfficeExtend, mesh |
Supported wireless LAN controllers | Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller |
Cisco Mobility Express | |
802.11n version 2.0 (and related) capabilities | 3x3 MIMO with two spatial streams |
Maximal ratio combining (MRC) | |
20- and 40-MHz channels | |
PHY data rates up to 300 Mbps (40 MHz with 5 GHz) | |
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
802.11 dynamic frequency selection (DFS) | |
Cyclic shift diversity (CSD) support | |
802.11ac Wave 1 and 2 capabilities | 3x3 MIMO with two spatial streams, single-user or multiuser MIMO |
MRC | |
802.11ac beamforming (transmit beamforming) | |
20-, 40-, and 80-MHz channels | |
PHY data rates up to 867 Mbps (80 MHz in 5 GHz) | |
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
802.11 DFS | |
CSD support | |
Integrated antenna | 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° |
5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° | |
Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) |
Management console port (RJ-45) | |
USB 2.0 (enabled via future software) | |
Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
Dimensions | Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) |
(W x L x H) | |
Weight | 3.12 lb (1.41 kg) |
Environmental | Cisco Aironet 1830i |
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
Operating temperature: 32° to 104°F (0° to 40°C) | |
Operating humidity: 10% to 90% (noncondensing) | |
Operating altitude test: 40˚C, 9843 ft. | |
System memory | 1 GB DRAM |
256 MB flash | |
Input power requirements | AP1830: 44 to 57 VDC |
Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz | |
Power draw | 15.4W |
Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. | |
Powering options | 802.3af/802.3at |
Enhanced PoE | |
Cisco local power supply, AIR-PWR-C= | |
Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= | |
Note: If 802.3af PoE is the source of power, the USB port is disabled. | |
Warranty | Bảo hành 1 năm |
1832I Series Access Points | ||
AIR-AP1832I-A-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; A Reg Domain | $715 |
AIR-AP1832I-B-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; B Reg Domain (for US) | $715 |
AIR-AP1832I-C-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; C Reg Domain | $715 |
AIR-AP1832I-D-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; D Reg Domain | $715 |
AIR-AP1832I-E-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; E Reg Domain | $715 |
AIR-AP1832I-F-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; F Reg Domain | $715 |
AIR-AP1832I-H-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; H Reg Domain | $715 |
AIR-AP1832I-I-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; I Reg Domain | $715 |
AIR-AP1832I-K-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; K Reg Domain | $715 |
AIR-AP1832I-N-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; N Reg Domain | $715 |
AIR-AP1832I-Q-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; Q Reg Domain | $715 |
AIR-AP1832I-R-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; R Reg Domain | $715 |
AIR-AP1832I-S-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; S Reg Domain | $715 |
AIR-AP1832I-T-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; T Reg Domain | $715 |
AIR-AP1832I-Z-K9 | 802.11ac Wave 2; 3x3:2SS; Int Ant; Z Reg Domain | $715 |
Part Number | AIR-AP1832I-S-K9 |
Description | 802.11ac Wave 2 AP, 3x3:2, Internal Antenna, H Regulatory Domain |
Features | - 3x3 MIMO with two spatial streams, single-user or multiuser MIMO |
- MRC | |
- 802.11ac beamforming (transmit beamforming) | |
- 20-, 40-, and 80-MHz channels | |
- PHY data rates up to 867 Mbps (80 MHz in 5 GHz) | |
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
- 802.11 DFS | |
- CSD support | |
Regulatory Domain | S (S regulatory domain): |
- 2.412 to 2.472 GHz; 13 channels | |
- 5.150 to 5.350 GHz; 8 channels | |
- 5.745 to 5.825 GHz; 5 channels | |
Integrated antenna | - 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° |
- 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° | |
Interfaces | - 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) |
- Management console port (RJ-45) | |
- USB 2.0 (enabled via future software) | |
Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) |
Weight | 3.12 lb (1.41 kg) |