AIR-AP2802E-S-K9 |
Software |
Cisco Unified Wireless Network Software Release 8.2.111.0 or later |
Cisco IOS®XE Software Release 16.3 |
Supported wireless LAN controllers |
Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller |
Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches |
Cisco Mobility Express |
802.11n version 2.0 (and related) capabilities |
4x4 MIMO with three spatial streams |
Maximal ratio combining (MRC) |
802.11n and 802.11a/g beamforming |
20- and 40-MHz channels |
PHY data rates up to 450 Mbps (40 MHz with 5 GHz) |
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) |
802.11 dynamic frequency selection (DFS) |
Cyclic shift diversity (CSD) support |
802.11ac Wave 1 capabilities |
4x4 MIMO with three spatial streams |
MRC |
802.11ac beamforming |
20-, 40-, and 80-MHz channels |
PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) |
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) |
802.11 DFS |
CSD support |
802.11ac Wave 2 capabilities |
4x4 MU-MIMO with three spatial streams |
MRC |
802.11ac beamforming |
20-, 40-, 80, 160-MHz channels |
PHY data rates up to 5.2 Gbps |
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) |
802.11 DFS |
CSD support |
Integrated antenna |
Flexible radio (either 2.4 GHz or 5 GHz) |
2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth |
5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90° |
Dedicated 5-GHz radio |
5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth |
External antenna (sold separately) |
2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
Smart antenna connector |
Available on the 2802e Series access points only |
Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point |
Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio |
Interfaces |
2802I/E |
◦ 2x100/1000BASE-T autosensing (RJ-45) |
Management console port (RJ-45) |
USB 2.0 (enabled via future software) |
Indicators |
Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
Dimensions (W x L x H) |
Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50” |
Weight |
Cisco Aironet 2802i |
3.53 lb (1.6 kg) |
Cisco Aironet 2802e |
4.6 lb (2.09 kg) |
Input power requirements |
802.3at PoE+, Cisco Universal PoE (Cisco UPOE®) |
802.3at power injector (AIR-PWRINJ6=) |
Power draw |
26W at the PSE with all features enabled except for the USB 2.0 port |
30W at the PSE with the USB 2.0 port enabled |
Environmental |
Cisco Aironet 2802i |
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) |
Nonoperating (storage) altitude test: 25˚C, 15,000 ft. |
Operating temperature: 32° to 104°F (0° to 40°C) |
Operating humidity: 10% to 90% (noncondensing) |
Operating altitude test: 40˚C, 9843 ft. |
Cisco Aironet 2802e |
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) |
Nonoperating (storage) altitude test: 25˚C, 15,000 ft. |
Operating temperature: -4° to 122°F (-20° to 50°C) |
Operating humidity: 10% to 90% (noncondensing) |
Operating altitude test: 40˚C, 9843 ft. |
System memory |
1024 MB DRAM |
256 MB flash |
Warranty |
Bảo hành 1 năm |