Thông số | |
Part numbers | Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas |
● C9105AXI-S: Cisco Catalyst 9105 Series
|
|
Cisco Catalyst 9105AX Access Point: Wall Plate, with internal antennas | |
● C9105AXW-S: Cisco Catalyst 9105 Series
|
|
Cisco Catalyst 9105AX Teleworker Access Point: Indoor environments, with internal antennas | |
● C9105AXIT-S: Cisco Catalyst 9105 Series
|
|
Software | Catalyst 9105 AXI |
● Cisco Unified Wireless Network Software Release 8.10.MR3 or later
|
|
● Cisco IOS ® XE Software Release 17.3.1, or later
|
|
Catalyst 9105AXW | |
● Cisco Unified Wireless Network Software Release 8.10MR3 or later
|
|
● Cisco IOS ® XE Software Release 17.3.1 or later
|
|
Supported wireless LAN controllers |
● Cisco Catalyst 9800 Series Wireless Controllers
|
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
|
|
802.11n version 2.0 (and related) capabilities |
● 2x2 MIMO with two spatial streams
|
● Maximal Ratio Combining (MRC)
|
|
● 802.11n and 802.11a/g
|
|
● 20- and 40-MHz channels
|
|
● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
|
|
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
|
|
● 802.11 Dynamic Frequency Selection (DFS)
|
|
● Cyclic Shift Diversity (CSD) support
|
|
802.11ac |
● 2x2 downlink MU-MIMO with two spatial streams
|
● MRC
|
|
● 802.11ac beamforming
|
|
● 20-, 40-, 80- MHz channels
|
|
● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
|
|
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
|
|
● 802.11 DFS
|
|
● CSD support
|
|
● WPA3 support
|
|
802.11ax |
● 2x2 uplink/downlink MU-MIMO with two spatial streams
|
● Uplink/downlink OFDMA
|
|
● TWT
|
|
● BSS coloring
|
|
● MRC
|
|
● 802.11ax beamforming
|
|
● 20-, 40-, 80- channels
|
|
● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
|
|
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
|
|
● 802.11 DFS
|
|
● CSD support
|
|
● WPA3 support
|
|
Integrated antenna | Catalyst 9105AXW |
● 2.4 GHz: Peak gain 3 dBi, internal antenna
|
|
● 5 GHz: Peak gain 5 dBi, internal antenna
|
|
Catalyst 9105AXI | |
● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
|
|
● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
|
|
Interfaces | Catalyst 9105AXW |
● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface
|
|
● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget)
|
|
● Management console port (RJ-45)
|
|
● USB 2.0 at 4.5W
|
|
● Passthru Port
|
|
Catalyst 9105AXI | |
● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface
|
|
● Management console port (RJ-45)
|
|
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
|
Kích thước Dimensions |
● Access point (without mounting brackets):
|
◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm) | |
◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm) | |
Cân nặng Weight | Cisco Catalyst 9105AXW |
● 0.8 lb. (373.2g)
|
|
Cisco Catalyst 9105AXI | |
● 0.7 lb. (329.5g)
|
|
Input power requirements |
● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®)
|
● Cisco power injector, AIR-PWRINJ6=
|
|
● 802.3af PoE
|
|
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
|
|
Accessories |
● Mounting bracket: AIR-AP-BRACKET-W4= (available as spare)
|
● Spacer kit: C9105AXW-KIT (sold separately)
|